To continue into this module you will need to have drafted and tested the Base Template and Working Template from Module 4 and Module 5 respectively.
If you are using your own Sloper that you have made elsewhere then please be aware that if you continue with this Unit that you may not be able to complete the Unit if your Sloper does not meet the requirements, so please review Module 5 to see if your Sloper has all details incorporated.
Also in order to get the best result from this Unit you will need to have created some designs to work from.
It is recommended to collect the following list of documents to use prior to starting this Module.
Completed Master Client Sheet. With all notes collected so far, you should have completed this during measurement of the Client.
Completed Measurements Sheets. With all measurements collected so far, you should have completed this during measurement of the Client.
Your Drafted Base Template for the Client. The preserved Card copy.
Previous Drafted Working Template Cards for the same Client (optional). It may help to check what you have previously drafted for Working Templates for this client to reflect on how Test Garments have worked out.
Your Capsule Wardrobe Designs for the Client. This will help work out what kind of Working Templates you will need to draft.
Your Sewing List Table for the Client. This will help you prioritise the Working Templates that you are going to create first.
Mini Drafting Templates. To practice dart manipulation when reviewing the Dart Manipulation Unit.
Pattern Record Card. To Organise all Flexible Pattern Pieces.
© 2017 Threadelicious. All Rights Reserved.